Download PDF
CC BY-NC-ND 4.0 · European Journal of General Dentistry 2016; 5(01): 6-10
DOI: 10.4103/2278-9626.172735
Original Article

Comparison of shear bond strength of self-adhering flowable composite with different flowable composites to dentin

Merve Erkmen Almaz
Department of Pediatric Dentistry, Kırıkkale University, Faculty of Dentistry, Kırıkkale, Turkey
,
Aylin Akbay Oba
Department of Pediatric Dentistry, Kırıkkale University, Faculty of Dentistry, Kırıkkale, Turkey
,
Işıl Şaroğlu Sönmez
1   Department of Pediatric Dentistry, Adnan Menderes University, Faculty of Dentistry, Aydın, Turkey
,
Deniz Sönmez
2   Adnan Menderes Boulevard, Kurtuluş District, Aydın, Turkey
› Author Affiliations
› Further Information
  PDF Download Permissions and Reprints

Abstract

Purpose: The purpose of this study was to measure and compare the shear bond strength of a self-adhering flowable resin composite with different flowable composites to dentin. Materials and Methods: A total of 48 extracted teeth were divided randomly into four groups, and dentin surfaces were exposed. Following materials were applied to dentin surfaces; Group I: VF (self-adhering flowable composite), Group II: CSE Bond (two-step self-etch adhesive) + CMF (conventional flowable composite), Group III: AB SE (one-step self-etch adhesive) + AF (conventional flowable composite), Group IV: AEO (one-step self-etch adhesive) + FUF (conventional flowable composite). The specimens were subjected to shear loading using a universal testing machine. The type of failure was detected with an illuminated microscope. One-way analysis of variance and Tukey multiple comparison test were used to determine statistical significance differences between groups. Results: Mean shear bond strength values were ranked as follows; Group II < Group IV < Group III < Group I. Statistically significant differences were found among all groups (P < 0.05). Conclusion: Group I; the self-adhering flowable resin composite had the lowest shear bond strength values while Group II; showed the highest shear bond strength among the materials tested.

Keywords

Dentin - flowable composite - shear strength


Publication History

Article published online:
01 November 2021

© 2016. European Journal of General Dentistry. This is an open access article published by Thieme under the terms of the Creative Commons Attribution-NonDerivative-NonCommercial-License, permitting copying and reproduction so long as the original work is given appropriate credit. Contents may not be used for commercial purposes, or adapted, remixed, transformed or built upon. (https://creativecommons.org/licenses/by-nc-nd/4.0/.)

Thieme Medical and Scientific Publishers Pvt. Ltd.
A-12, 2nd Floor, Sector 2, Noida-201301 UP, India

 

  • References

  • 1 Bayne SC, Thompson JY, Swift EJ Jr, Stamatiades P, Wilkerson M. A characterization of first-generation flowable composites. J Am Dent Assoc 1998;129:567-77.
  • 2 Unterbrink GL, Liebenberg WH. Flowable resin composites as “filled adhesives”: Literature review and clinical recommendations. Quintessence Int 1999;30:249-57.
  • 3 Attar N, Tam LE, McComb D. Flow, strength, stiffness and radiopacity of flowable resin composites. J Can Dent Assoc 2003;69:516-21.
  • 4 Ferdianakis K. Microleakage reduction from newer esthetic restorative materials in permanent molars. J Clin Pediatr Dent 1998;22:221-9.
  • 5 Ikeda M, Tsubota K, Takamizawa T, Yoshida T, Miyazaki M, Platt JA. Bonding durability of single-step adhesives to previously acid-etched dentin. Oper Dent 2008;33:702-9.
  • 6 Van Meerbeek B, Van Landuyt K, De Munck J, Hashimoto M, Peumans M, Lambrechts P, et al. Technique-sensitivity of contemporary adhesives. Dent Mater J 2005;24:1-13.
  • 7 Korkmaz Y, Gurgan S, Firat E, Nathanson D. Shear bond strength of three different nano-restorative materials to dentin. Oper Dent 2010;35:50-7.
  • 8 Vichi A, Margvelashvili M, Goracci C, Papacchini F, Ferrari M. Bonding and sealing ability of a new self-adhering flowable composite resin in class I restorations. Clin Oral Investig 2013;17:1497-506.
  • 9 Sudsangiam S, van Noort R. Do dentin bond strength tests serve a useful purpose? J Adhes Dent 1999;1:57-67.
  • 10 Naughton WT, Latta MA. Bond strength of composite to dentin using self-etching adhesive systems. Quintessence Int 2005;36:259-62.
  • 11 Dos Santos PA, Garcia PP, Palma-Dibb RG. Shear bond strength of adhesive systems to enamel and dentin. Thermocycling influence. J Mater Sci Mater Med 2005;16:727-32.
  • 12 Gupta S, Vellanki VK, Shetty VK, Kushwah S, Goyal G, Chandra SM.In vitro evaluation of shear bond strength of nanocomposites to dentin. J Clin Diagn Res 2015;9:ZC09-11.
  • 13 Yazici AR, Celik C, Ozgünaltay G, Dayangaç B. Bond strength of different adhesive systems to dental hard tissues. Oper Dent 2007;32:166-72.
  • 14 Singh K, Naik R, Hegde S, Damda A. Shear bond strength of superficial, intermediate and deep dentin in vitro with recent generation self-etching primers and single nano composite resin. J Int Oral Health 2015;7 Suppl 1:28-32.
  • 15 Duddu MK, Muppa R, Panthula P, Srinivas NCh. Comparison of shear bond strength and micro-leakage of three commercially available seventh generation bonding agents in primary anterior teeth: An in vitro study. J Indian Soc Pedod Prev Dent 2015;33:116-21.
  • 16 Peumans M, Kanumilli P, De Munck J, Van Landuyt K, Lambrechts P, Van Meerbeek B. Clinical effectiveness of contemporary adhesives: A systematic review of current clinical trials. Dent Mater 2005;21:864-81.
  • 17 Roh OD, Chung JH. Micro-shear bond strength of five resin-based composites to dentin with five different dentin adhesives. Am J Dent 2005;18:333-7.
  • 18 Tanumiharja M, Burrow MF, Tyas MJ. Microtensile bond strengths of seven dentin adhesive systems. Dent Mater 2000;16:180-7.
  • 19 Teixeira CS, Chain MC. Evaluation of shear bond strength between self-etching adhesive systems and dentin and analysis of the resin-dentin interface. Gen Dent 2010;58:e52-61.
  • 20 Bradna P, Vrbova R, Dudek M, Roubickova A, Housova D. Comparison of bonding performance of self-etching and etch-and-rinse adhesives on human dentin using reliability analysis. J Adhes Dent 2008;10:423-9.
  • 21 Ishikawa A, Shimada Y, Foxton RM, Tagami J. Micro-tensile and micro-shear bond strengths of current self-etch adhesives to enamel and dentin. Am J Dent 2007;20:161-6.
  • 22 Nam KY, Kim JB, Jang BC, Kwon TY, Kim KH. Effects of dentin bonding agents on bonding durability of a flowable composite to dentin. Dent Mater J 2007;26:224-31.
  • 23 Park SB, Son WS, Ko CC, García-Godoy F, Park MG, Kim HI, et al. Influence of flowable resins on the shear bond strength of orthodontic brackets. Dent Mater J 2009;28:730-4.
  • 24 Van Meerbeek B, De Munck J, Yoshida Y, Inoue S, Vargas M, Vijay P, et al. Buonocore memorial lecture. Adhesion to enamel and dentin: Current status and future challenges. Oper Dent 2003;28:215-35.
  • 25 Ermis RB, De Munck J, Cardoso MV, Coutinho E, Van Landuyt KL, Poitevin A, et al. Bond strength of self-etch adhesives to dentin prepared with three different diamond burs. Dent Mater 2008;24:978-85.
  • 26 Nakabayashi N, Pashley DH. Hybridization of Dental Hard Tissues. Japan: Quintessence Publishing Co.; 1998. p. 37-56.
  • 27 Goracci C, Margvelashvili M, Giovannetti A, Vichi A, Ferrari M. Shear bond strength of orthodontic brackets bonded with a new self-adhering flowable resin composite. Clin Oral Investig 2013;17:609-17.
  • 28 Bektas OO, Eren D, Akin EG, Akin H. Evaluation of a self-adhering flowable composite in terms of micro-shear bond strength and microleakage. Acta Odontol Scand 2013;71:541-6.
  • 29 Miyazaki M, Ando S, Hinoura K, Onose H, Moore BK. Influence of filler addition to bonding agents on shear bond strength to bovine dentin. Dent Mater 1995;11:234-8.
  • 30 Tuloglu N, Sen Tunc E, Ozer S, Bayrak S. Shear bond strength of self-adhering flowable composite on dentin with and without application of an adhesive system. J Appl Biomater Funct Mater 2014;12:97-101.
  • 31 Pacifici E, Chazine M, Vichi A, Grandini S, Goracci C, Ferrari M. Shear-bond strength of a new self-adhering flowable restorative material to dentin of primary molars. J Clin Pediatr Dent 2013;38:149-54.
  • 32 Juloski J, Goracci C, Rengo C, Giovannetti A, Vichi A, Vulicevic ZR, et al. Enamel and dentin bond strength of new simplified adhesive materials with and without preliminary phosphoric acid-etching. Am J Dent 2012;25:239-43.