Recent Applications of Electrocoagulation in Treatment of Water and Wastewater—A Review

Abstract

During the last two decades, and particularly during the last few years, the environmental sector has shown a largely growing interest in the treatment of different types of water and wastewater by electrocoagulation (EC). The aim of this work was to review studies, conducted mainly during 2008-2011, on the wide and versatile range of feasible EC applications employed in the purification of different types of water and wastewater. The EC applications discussed here were divided into 7 following categories: tannery, textile and colored wastewater; pulp and paper industry wastewater; oily wastewater; food industry wastewater; other types of industrial wastewater; surface water as well as model water and wastewater containing heavy metals, nutrients, cyanide and other elements and ions. In addition, this paper presents an overview of the optimum process conditions (treatment times, current densities, and initial pH) and removal efficiencies (mostly high) achieved for the EC applications discussed. In the vast majority of the studies discussed in this review, the aforementioned values were found to be in the range of 5-60 min (typically less than 30 min), 10-150 A/m2 and near neutral pH, respectively. Both operating costs and electrical energy consumption values were found to vary greatly depending on the type of solution being treated, being between 0.004 -6.74 €/m3 and 0.002-58.0 kWh/m3, but in general they were rather low (typically around 0.1-1.0 €/m3 and 0.4-4.0 kWh/m3).

Share and Cite:

V. Kuokkanen, T. Kuokkanen, J. Rämö and U. Lassi, "Recent Applications of Electrocoagulation in Treatment of Water and Wastewater—A Review," Green and Sustainable Chemistry, Vol. 3 No. 2, 2013, pp. 89-121. doi: 10.4236/gsc.2013.32013.

Conflicts of Interest

The authors declare no conflicts of interest.

References

[1] P. K. Holt, G. W. Barton and C. A. Mitchell, “The Future for Electrocoagulation as a Localised Water Treatment Technology,” Chemosphere, Vol. 59, No. 3, 2005, pp. 355-367. doi:10.1016/j.chemosphere.2004.10.023
[2] G. Chen, “Electrochemical Technologies in Wastewater Treatment,” Separation and Purification Technology, Vol. 38, No. 1, 2004, pp. 11-41. doi:10.1016/j.seppur.2003.10.006
[3] M. M. Emamjomeh and M. Sivakumar, “Review of Pollutants Removed by Electrocoagulation and Electrocoagulation/Flotation Processes,” Journal of Environmental Management, Vol. 90, No. 5, 2009, pp. 1663-1679. doi:10.1016/j.jenvman.2008.12.011
[4] E. Butler, Y.-T. Hung, R. Y.-L. Yeh and M. S. Al Ahmad, “Electrocoagulation in Wastewater Treatment,” Water, Vol. 3, No. 2, 2011, pp. 495-525. doi:10.3390/w3020495
[5] M. Y. A. Mollah, R. Schennach, J. R. Parga and D. L. Cocke, “Electrocoagulation (EC)—Science and Applications,” Journal of Hazardous Materials, Vol. 84, No. 1, 2001, pp. 29-41. doi:10.1016/S0304-3894(01)00176-5
[6] P. R. Kumar, S. Chaudhari, K. C. Khilar and S. P. Mahajan, “Removal of Arsenic from Water by Electrocoagulation,” Chemosphere, Vol. 55, No. 9, 2004, pp. 1245-1252. doi:10.1016/j.chemosphere.2003.12.025
[7] X. Chen, G. Chen and P. L. Yue, “Separation of Pollutants from Restaurant Wastewater by Electrocoagulation,” Separation and Purification Technology, Vol. 19, No. 1-2, 2000, pp. 65-76. doi:10.1016/S1383-5866(99)00072-6
[8] S. Zodi, O. Potier, F. Lapicque and J. Leclerc, “Treatment of the Textile Wastewaters by Electrocoagulation: Effect of Operating Parameters on the Sludge Settling Characteristics,” Separation and Purification Technology, Vol. 69, No. 1, 2009, pp. 29-36. doi:10.1016/j.seppur.2009.06.028
[9] S. Gao, M. Du, J. Tian, J. Yang, J. Yang, F. Ma and J. Nan, “Effects of Chloride Ions on Electro-Coagulation-Flotation Process with Aluminum Electrodes for Algae Removal,” Journal of Hazardous Materials, Vol. 182, No. 1-3, 2010, pp. 827-834. doi:10.1016/j.jhazmat.2010.06.114
[10] E. Terrazas, A. Vázquez, R. Briones, I. Lázaro and I. Rodríguez, “EC Treatment for Reuse of Tissue Paper Wastewater: Aspects That Affect Energy Consumption,” Journal of Hazardous Materials, Vol. 181, No. 1-3, 2010, pp. 809-816. doi:10.1016/j.jhazmat.2010.05.086
[11] S. Kongjao, S. Damronglerd and M. Hunsom, “Simultaneous Removal of Organic and Inorganic Pollutants in Tannery Wastewater Using Electrocoagulation Technique,” Korean Journal of Chemical Engineering, Vol. 25, No. 4, 2008, pp. 703-709. doi:10.1007/s11814-008-0115-1
[12] I. A. Sengil and M. Ozacar, “The Decolorization of C.I. Reactive Black 5 in Aqueous Solution by Electrocoagulation Using Sacrificial Iron Electrodes,” Journal of Hazardous Materials, Vol. 161, No. 2-3, 2009, pp. 1369-1376. doi:10.1016/j.jhazmat.2008.04.100
[13] M. Kobya, F. Ulu, U. Gebologlu, E. Demirbas and M. S. Oncel, “Treatment of Potable Water Containing Low Concentration of Arsenic with Electrocoagulation: Different Connection Modes and Fe-Al Electrodes,” Separation and Purification Technology, Vol. 77, No. 3, 2011, pp. 283-293. doi:10.1016/j.seppur.2010.12.018
[14] G. Mouedhen, M. Feki, M. D. P. Wery and H. F. Ayedi, “Behavior of Aluminum Electrodes in Electrocoagulation Process,” Journal of Hazardous Materials, Vol. 150, No. 1, 2008, pp. 124-135. doi:10.1016/j.jhazmat.2007.04.090
[15] K. Yetilmezsoy, F. Ilhan, Z. Sapci-Zengin, S. Sakar and M. T. Gonullu, “Decolorization and COD Reduction of UASB Pretreated Poultry Manure Wastewater by Electrocoagulation Process: A Post-Treatment Study,” Journal of Hazardous Materials, Vol. 162, No. 1, 2009, pp. 120-132. doi:10.1016/j.jhazmat.2008.05.015
[16] M. Rebhun and M. Lurie, “Control of Organic Matter by Coagulation and Floc Separation,” Water Science and Technology, Vol. 27, No. 11, 1993, pp. 1-20.
[17] M. Kobya, O. T. Can and M. Bayramoglu, “Treatment of Textile Wastewaters by Electrocoagulation Using Iron and Aluminum Electrodes,” Journal of Hazardous Materials, Vol. 100, No. 1-3, 2003, pp. 163-178. doi:10.1016/S0304-3894(03)00102-X
[18] L. D. Benefield, J. F. Judkins and B. L. Weand, “Process Chemistry for Water and Wastewater Treatment,” Prentice-Hall, Englewood Cliffs, 1982.
[19] A. J. Rubin, “Aqueous-Environmental Chemistry of Metals,” Ann Arbor Science Publishers, Ann Arbor, 1974.
[20] F. Akbal and S. Camc1, “Comparison of Electrocoagulation and Chemical Coagulation for Heavy Metal Removal,” Chemical Engineering & Technology, Vol. 33, No. 10, 2010, pp. 1655-1664. doi:10.1002/ceat.201000091
[21] J. Duan and J. Gregory, “Coagulation by Hydrolysing Metal Salts,” Advances in Colloid and Interface Science, Vol. 100-102, 2003, pp. 475-502. doi:10.1016/S0001-8686(02)00067-2
[22] A. Kumar, “Tannery Effluent,” In: M. Doble and A. Ku- mar, Eds., Biotreatment of Industrial Effluents, Butter-worth-Heinemann, Burlington, 2005, pp. 133-143.
[23] R. M. Makdisi, “Tannery Wastes Definition, Risk Assess- ment and Cleanup Options, Berkeley, California,” Journal of Hazardous Materials, Vol. 29, No. 1, 1991, pp. 79-96. doi:10.1016/0304-3894(91)87075-D
[24] N. M. Mahmoodi, M. Arami, N. Y. Limaee and N. S. Tabrizi, “Decolorization and Aromatic Ring Degradation Kinetics of Direct Red 80 by UV Oxidation in the Presence of Hydrogen Peroxide Utilizing TiO2 as a Photo-catalyst,” Chemical Engineering Journal, Vol. 112, No. 1-3, 2005, pp. 191-196. doi:10.1016/j.cej.2005.07.008
[25] Y. Yalc1n Sevki, “Optimization of Bomaplex Red CR-L Dye Removal from Aqueous Solution by Electrocoagu- lation Using Aluminum Electrodes,” Journal of Hazardous Materials, Vol. 153, No. 1-2, 2008, pp. 194-200. doi:10.1016/j.jhazmat.2007.08.034
[26] O. Apaydin, U. Kurt and M. T. Gonüllü, “An Investigation on the Treatment of Tannery Wastewater by Electrocoagulation,” Global Nest Journal, Vol. 11, No. 4, 2009, pp. 546-555.
[27] L. Szpyrkowicz, S. N. Kaul and R. N. Neti, “Tannery Wastewater Treatment by Electro-Oxidation Coupled with a Biological Process,” Journal of Applied Electrochemistry, Vol. 35, No. 4, 2005, pp. 381-390. doi:10.1007/s10800-005-0796-7
[28] S. Zodi, O. Potier, F. Lapicque and J. Leclerc, “Treatment of the Industrial Wastewaters by Electrocoagulation: Optimization of Coupled Electrochemical and Sedimentation Processes,” Desalination, Vol. 261, No. 1-2, 2010, pp. 186-190. doi:10.1016/j.desal.2010.04.024
[29] S. Aoudj, A. Khelifa, N. Drouiche, M. Hecini and H. Hamitouche, “Electrocoagulation Process Applied to Waste-water Containing Dyes from Textile Industry,” Chemical Engineering and Processing: Process Intensification, Vol. 49, No. 11, 2010, pp. 1176-1182. doi:10.1016/j.cep.2010.08.019
[30] C. Phalakornkule, P. Sukkasem and C. Mutchimsattha, “Hydrogen Recovery from the Electrocoagulation Treatment of Dye-Containing Wastewater,” International Journal of Hydrogen Energy, Vol. 35, No. 20, 2010, pp. 10934-10943. doi:10.1016/j.ijhydene.2010.06.100
[31] C. Phalakornkule, S. Polgumhang, W. Tongdaung, B. Karakat and T. Nuyut, “Electrocoagulation of Blue Reactive, Red Disperse and Mixed Dyes, and Application in Treating Textile Effluent,” Journal of Environmental Management, Vol. 91, No. 4, 2010, pp. 918-926. doi:10.1016/j.jenvman.2009.11.008
[32] P. Durango-Usuga, F. Guzmán-Duque, R. Mosteo, M. V. Vazquez, G. Peñuela and R. A. Torres-Palma, “Experimental Design Approach Applied to the Elimination of Crystal Violet in Water by Electrocoagulation with Fe or Al Electrodes,” Journal of Hazardous Materials, Vol. 179, No. 1-3, 2010, pp. 120-126. doi:10.1016/j.jhazmat.2010.02.067
[33] E. Z. El-Ashtoukhy and N. K. Amin, “Removal of Acid Green Dye 50 from Wastewater by Anodic Oxidation and Electrocoagulation—A Comparative Study,” Journal of Hazardous Materials, Vol. 179, No. 1-3, 2010, pp. 113-119. doi:10.1016/j.jhazmat.2010.02.066
[34] J. B. Parsa, H. R. Vahidian, A. R. Soleymani and M. Abbasi, “Removal of Acid Brown 14 in Aqueous Media by Electrocoagulation: Optimization Parameters and Minimizing of Energy Consumption,” Desalination, Vol. 278, No. 1-3, 2011, pp. 295-302. doi:10.1016/j.desal.2011.05.040
[35] A. Aleboyeh, N. Daneshvar and M. B. Kasiri, “Optimization of C.I. Acid Red 14 Azo Dye Removal by Electrocoagulation Batch Process with Response Surface Methodology,” Chemical Engineering and Processing: Process Intensification, Vol. 47, No. 5, 2008, pp. 827-832. doi:10.1016/j.cep.2007.01.033
[36] M. Y. A. Mollah, J. A. G. Gomes, K. K. Das and D. L. Cocke, “Electrochemical Treatment of Orange II Dye Solution—Use of Aluminum Sacrificial Electrodes and Floc Characterization,” Journal of Hazardous Materials, Vol. 174, No. 1-3, 2010, pp. 851-858. doi:10.1016/j.jhazmat.2009.09.131
[37] M. S. Secula, I. Cretescu and S. Petrescu, “An Experimental Study of Indigo Carmine Removal from Aqueous Solution by Electrocoagulation,” Desalination, Vol. 277, No. 1-3, 2011, pp. 227-235. doi:10.1016/j.desal.2011.04.031
[38] B. Merzouk, B. Gourich, A. Sekki, K. Madani, C. Vial and M. Barkaoui, “Studies on the Decolorization of Textile Dye Wastewater by Continuous Electrocoagulation Process,” Chemical Engineering Journal, Vol. 149, No. 1-3, 2009, pp. 207-214. doi:10.1016/j.cej.2008.10.018
[39] F. Zidane, P. Drogui, B. Lekhlif, J. Bensaid, J. F. Blais, S. Belcadi and K. El Kacemi, “Decolourization of Dye-Containing Effluent Using Mineral Coagulants Produced by Electrocoagulation,” Journal of Hazardous Materials, Vol. 155, No. 1-2, 2008, pp. 153-163. doi:10.1016/j.jhazmat.2007.11.041
[40] A. R. Khataee, V. Vatanpour and A. R. Amani Ghadim, “Decolorization of C.I. Acid Blue 9 Solution by UV/ Nano-TiO2, Fenton, Fenton-Like, Electro-Fenton and Electrocoagulation Processes: A Comparative Study,” Journal of Hazardous Materials, Vol. 161, No. 2-3, 2009, pp. 1225-1233. doi:10.1016/j.jhazmat.2008.04.075
[41] A. H. Essadki, M. Bennajah, B. Gourich, C. Vial, M. Azzi and H. Delmas, “Electrocoagulation/Electroflotation in an External-Loop Airlift Reactor—Application to the Decolorization of Textile Dye Wastewater: A Case Stu- dy,” Chemical Engineering and Processing: Process Intensification, Vol. 47, No. 8, 2008, pp. 1211-1223. doi:10.1016/j.cep.2007.03.013
[42] B. Merzouk, M. Yakoubi, I. Zongo, J.-P. Leclerc, G. Paternotte, S. Pontvianne and F. Lapicque, “Effect of Modi- fication of Textile Wastewater Composition on Electrocoagulation Efficiency,” Desalination, Vol. 275, No. 1-3, 2011, pp. 181-186. doi:10.1016/j.desal.2011.02.055
[43] A. Benhadji, M. Taleb Ahmed and R. Maachi, “Electrocoagulation and Effect of Cathode Materials on the Removal of Pollutants from Tannery Wastewater of Rouïba,” Desalination, Vol. 277, No. 1-3, 2011, pp. 128-134. doi:10.1016/j.desal.2011.04.014
[44] K. S. P. Kalyani, N. Balasubramanian and C. Sriniva-sakannan, “Decolorization and COD Reduction of Paper Industrial Effluent Using Electro-Coagulation,” Chemical Engineering Journal, Vol. 151, No. 1-3, 2009, pp. 97-104. doi:10.1016/j.cej.2009.01.050
[45] M. Zaied and N. Bellakhal, “Electrocoagulation Treatment of Black Liquor from Paper Industry,” Journal of Hazardous Materials, Vol. 163, No. 2-3, 2009, pp. 995- 1000. doi:10.1016/j.jhazmat.2008.07.115
[46] M. Ugurlu, A. Gürses, C. Dogar and M. Yalcm, “The Removal of Lignin and Phenol from Paper Mill Effluents by Electrocoagulation,” Journal of Hazardous Materials, Vol. 87, No. 3, 2008, pp. 420-428. doi:10.1016/j.jenvman.2007.01.007
[47] S. Zodi, J. Louvet, C. Michon, O. Potier, M. Pons, F. Lapicque and J. Leclerc, “Electrocoagulation as a Tertiary Treatment for Paper Mill Wastewater: Removal of Non-Biodegradable Organic Pollution and Arsenic,” Separation and Purification Technology, Vol. 81 , No. 1, 2011, pp. 62-68. doi:10.1016/j.seppur.2011.07.002
[48] R. Katal and H. Pahlavanzadeh, “Influence of Different Combinations of Aluminum and Iron Electrode on Electrocoagulation Efficiency: Application to the Treatment of Paper Mill Wastewater,” Desalination, Vol. 265, No. 1-3, 2011, pp. 199-205. doi:10.1016/j.desal.2010.07.052
[49] M. Vepsalainen, H. Kivisaari, M. Pulliainen, A. Oikari and M. Sillanpaa, “Removal of Toxic Pollutants from Pulp Mill Effluents by Electrocoagulation,” Separation and Purification Technology, Vol. 81, No. 2, 2011, pp. 141-150. doi:10.1016/j.seppur.2011.07.017
[50] S. Bellebia, S. Kacha, A. Z. Bouyakoub and Z. Derriche, “Experimental Investigation of Chemical Oxygen Demand and Turbidity Removal from Cardboard Paper Mill Effluents Using Combined Electrocoagulation and Adsorption Processes,” Environmental Progress & Sustainable Energy, Vol. 31, No. 3, 2011, pp. 361-370. doi:10.1002/ep.10556
[51] M. Hanafy and H. I. Nabih, “Treatment of Oily Waste-water Using Dissolved Air Flotation Technique,” Energy Sources, Part A: Recovery, Utilization and Environmental Effects, Vol. 29, No. 2, 2007, pp. 143-159. doi:10.1080/009083190948711
[52] E. GilPavas, K. Molina-Tirado and M. á. Gómez-García, “Treatment of Automotive Industry Oily Wastewater by Electrocoagulation: Statistical Optimization of the Operational Parameters,” Water Science and Technology, Vol. 60, No. 10, 2009, pp. 2581-2588. doi:10.2166/wst.2009.519
[53] M. Saeedi and A. Khalvati-Fahlyani, “Treatment of Oily Wastewater of a Gas Refinery by Electrocoagulation Using Aluminum Electrodes,” Water Environment Research, Vol. 83, No. 3, 2011, pp. 256-264. doi:10.2175/106143010X12780288628499
[54] P. Drogui, M. Asselin, S. K. Brar, H. Benmoussa and J.-F. Blais, “Electrochemical Removal of Organics and Oil from Sawmill and Ship Effluents,” Canadian Journal of Civil Engineering, Vol. 36, No.3, 2009, pp. 529-539. doi:10.1139/L09-003
[55] P. Canizares, F. Martínez, C. Jiménez, C. Sáez and M. A. Rodrigo, “Coagulation and Electrocoagulation of Oil-in-Water Emulsions,” Journal of Hazardous Materials, Vol. 151, No. 1, 2008, pp. 44-51. doi:10.1016/j.jhazmat.2007.05.043
[56] P. Canizares, C. Jiménez, F. Martínez, M. A. Rodrigo and C. Sáez, “The pH as a Key Parameter in the Choice between Coagulation and Electrocoagulation for the Treatment of Wastewaters,” Journal of Hazardous Materials, Vol. 163, No. 1, 2009, pp. 158-164. doi:10.1016/j.jhazmat.2008.06.073
[57] C. J. Izquierdo, P. Canizares, M. A. Rodrigo, J. P. Leclerc, G. Valentin and F. Lapicque, “Effect of the Nature of the Supporting Electrolyte on the Treatment of Soluble Oils by Electrocoagulation,” Desalination, Vol. 255, No. 1-3, 2010, pp. 15-20. doi:10.1016/j.desal.2010.01.022
[58] K. Bensadok, S. Benammar, F. Lapicque and G. Nezzal, “Electrocoagulation of Cutting Oil Emulsions Using Aluminium Plate Electrodes,” Journal of Hazardous Materials, Vol. 152, No. 1, 2008, pp. 423-430. doi:10.1016/j.jhazmat.2007.06.121
[59] M. H. El-Naas, S. Al-Zuhair, A. Al-Lobaney and S. Ma- khlouf, “Assessment of Electrocoagulation for the Treat- ment of Petroleum Refinery Wastewater,” Journal of Ha- zardous Materials, Vol. 91, No. 1, 2009, pp. 180-185. doi:10.1016/j.jenvman.2009.08.003
[60] M. B. Agustin, W. P. Sengpracha and W. Phutdhawong, “Electrocoagulation of Palm Oil Mill Effluent,” International Journal of Environmental Research and Public Health, Vol. 5 , No. 3, 2008, pp. 177-180. doi:10.3390/ijerph5030177
[61] T. J. Ahmad and D. Zawawi, “Palm Oil Mill Effluent (POME) Treatment by Using an Electrocoagulation Method,” Research Journal of Chemistry and Environment, Vol. 15, No. 2, 2011, pp. 606-609.
[62] M. Tir and N. Moulai-Mostefa, “Optimization of Oil Removal from Oily Wastewater by Electrocoagulation Using Response Surface Method,” Journal of Hazardous Materials, Vol. 158, No. 1, 2008, pp. 107-115. doi:10.1016/j.jhazmat.2008.01.051
[63] M. Asselin, P. Drogui, S. K. Brar, H. Benmoussa and J. Blais, “Organics Removal in Oily Bilgewater by Electrocoagulation Process,” Journal of Hazardous Materials, Vol. 151, No. 2-3, 2008, pp. 446-455. doi:10.1016/j.jhazmat.2007.06.008
[64] U. Tezcan Un, A. S. Koparal and U. Bakir Ogutveren, “Electrocoagulation of Vegetable Oil Refinery Waste-water Using Aluminum Electrodes,” Journal of Environmental Management, Vol. 90 , No. 1, 2009, pp. 428-433. doi:10.1016/j.jenvman.2007.11.007
[65] Y. Meas, J. A. Ramirez, M. A. Villalon and T. W. Chapman, “Industrial Wastewaters Treated by Electrocoagulation,” Electrochimica Acta, Vol. 55, No. 27, 2010, pp. 8165-8171. doi:10.1016/j.electacta.2010.05.018
[66] F. Hanafi, O. Assobhei and M. Mountadar, “Detoxifi- cation and Discoloration of Moroccan Olive Mill Waste-water by Electrocoagulation,” Journal of Hazardous Materials, Vol. 174, No. 1-3, 2010, pp. 807-812. doi:10.1016/j.jhazmat.2009.09.124
[67] M. Kobya, C. Ciftci, M. Bayramoglu and M. T. Sensoy, “Study on the Treatment of Waste Metal Cutting Fluids Using Electrocoagulation,” Separation and Purification Technology, Vol. 60, No. 3, 2008, pp. 285-291. doi:10.1016/j.seppur.2007.09.003
[68] G. Moussavi, R. Khosravi and M. Farzadkia, “Removal of Petroleum Hydrocarbons from Contaminated Ground-water Using an Electrocoagulation Process: Batch and Continuous Experiments,” Desalination, Vol. 278, No. 1-3, 2011, pp. 288-294. doi:10.1016/j.desal.2011.05.039
[69] K. Suehara, Y. Kawamoto, E. Fujii, J. Kohda, Y. Nakano and T. Yano, “Biological Treatment of Wastewater Discharged from Biodiesel Fuel Production Plant with Alkali-Catalyzed Transesterification,” Journal of Bioscience and Bioengineering, Vol. 100, No. 4, 2005, pp. 437-442. doi:10.1263/jbb.100.437
[70] O. Chavalparit and M. Ongwandee, “Optimizing Electro- coagulation Process for the Treatment of Biodiesel Waste-water Using Response Surface Methodology,” Journal of Environmental Sciences, Vol. 21, No. 11, 2009, pp. 1491-1496. doi:10.1016/S1001-0742(08)62445-6
[71] Y. Avsar, U. Kurt and T. Gonullu, “Comparison of Classical Chemical and Electrochemical Processes for Treating Rose Processing Wastewater,” Journal of Hazardous Materials, Vol. 148, No. 1-2, 2007, pp. 340-345. doi:10.1016/j.jhazmat.2007.02.048
[72] B. Demirel, O. Yenigun and T. T. Onay, “Anaerobic Treatment of Dairy Wastewaters: A Review,” Process Biochemistry, Vol. 40, No. 8, 2005, pp. 2583-2595. doi:10.1016/j.procbio.2004.12.015
[73] I. A. Sengil and M. Ozacar, “Treatment of Dairy Waste-waters by Electrocoagulation Using Mild Steel Electrodes,” Journal of Hazardous Materials, Vol. 137, No. 2, 2006, pp. 1197-1205. doi:10.1016/j.jhazmat.2006.04.009
[74] B. Balannec, M. Vourch, M. Rabiller-Baudry and B. Chaufer, “Comparative Study of Different Nanofiltration and Reverse Osmosis Membranes for Dairy Effluent Treatment by Dead-End Filtration,” Separation and Purification Technology, Vol. 42, No. 2, 2005, pp. 195-200. doi:10.1016/j.seppur.2004.07.013
[75] K. Bensadok, N. El Hanafi and F. Lapicque, “Electro-chemical Treatment of Dairy Effluent Using Combined Al and Ti/Pt Electrodes System,” Desalination, Vol. 280, No. 1-3, 2011, pp. 244-251. doi:10.1016/j.desal.2011.07.006
[76] S. Tchamango, C. P. Nanseu-Njiki, E. Ngameni, D. Hadjiev and A. Darchen, “Treatment of Dairy Effluents by Electrocoagulation Using Aluminium Electrodes,” Science of the Total Environment, Vol. 408, No. 8, 2010, pp. 947-952. doi:10.1016/j.scitotenv.2009.10.026
[77] J. P. Kushwaha, V. C. Srivastava and I. D. Mall, “Organics Removal from Dairy Wastewater by Electrochemical Treatment and Residue Disposal,” Separation and Purification Technology, Vol. 76, No. 2, 2010, pp. 198-205. doi:10.1016/j.seppur.2010.10.008
[78] M. Kobya, H. Hiz, E. Senturk, C. Aydiner and E. Demirbas, “Treatment of Potato Chips Manufacturing Waste-water by Electrocoagulation,” Desalination, Vol. 190, No. 1-3, 2006, pp. 201-211. doi:10.1016/j.desal.2005.10.006
[79] D. Valero, J. M. Ortiz, V. García, E. Expósito, V. Montiel and A. Aldaz, “Electrocoagulation of Wastewater from Almond Industry,” Chemosphere, Vol. 84, No. 9, 2011, pp. 1290-1295. doi:10.1016/j.chemosphere.2011.05.032
[80] G. Roa-Morales, E. Campos-Medina, J. Aguilera-Cotero, B. Bilyeu and C. Barrera-Díaz, “Aluminum Electrocoagulation with Peroxide Applied to Wastewater from Pasta and Cookie Processing,” Separation and Purification Technology, Vol. 54, No. 1, 2007, pp. 124-129. doi:10.1016/j.seppur.2006.08.025
[81] M. Asselin, P. Drogui, H. Benmoussa and J. Blais, “Effectiveness of Electrocoagulation Process in Removing Organic Compounds from Slaughterhouse Wastewater Using Monopolar and Bipolar Electrolytic Cells,” Che- mosphere, Vol. 72, No. 11, 2008, pp. 1727-1733. doi:10.1016/j.chemosphere.2008.04.067
[82] L. J. Xu, B. W. Sheldon, D. K. Larick and R. E. Carawan, “Recovery and Utilization of Useful By-Products from Egg Processing Wastewater by Electrocoagulation,” Poultry Science, Vol. 81, No. 6, 2002, pp. 785-792.
[83] M. Kobya and S. Delipinar, “Treatment of the Baker’s Yeast Wastewater by Electrocoagulation,” Journal of Hazardous Materials, Vol. 154, No. 1-3, 2008, pp. 1133-1140. doi:10.1016/j.jhazmat.2007.11.019
[84] J. K. Maghanga, F. K. Segor, L. Etiégni and J. Lusweti, “Electrocoagulation Method for Colour Removal in Tea Effluent: A Case Study of Chemomi Tea Factory in Rift Valley, Kenya,” Bulletin of the Chemical Society of Ethiopia, Vol. 23, No. 3, 2009, pp. 371-381. doi:10.4314/bcse.v23i3.47661
[85] I. Linares-Hernández, C. Barrera-Díaz, G. Roa-Morales, B. Bilyeu and F. Urena-Núnez, “Influence of the Anodic Material on Electrocoagulation Performance,” Chemical Engineering Journal, Vol. 148, No. 1, 2009, pp. 97-105. doi:10.1016/j.cej.2008.08.007
[86] M. R. V. Lanza and R. Bertazzoli, “Cyanide Oxidation from Wastewater in a Flow Electrochemical Reactor,” Industrial and Engineering Chemistry Research, Vol. 41, No. 1, 2002, pp. 22-26.
[87] M. Kobya, E. Demirbas, N. U. Parlak and S. Yigit, “Treatment of Cadmium and Nickel Electroplating Rinse Water by Electrocoagulation,” Environmental Technology, Vol. 31, No. 13, 2010, pp. 1471-1481. doi:10.1080/09593331003713693
[88] I. Heidmann and W. Calmano, “Removal of Ni, Cu and Cr from a Galvanic Wastewater in an Electrocoagulation System with Fe-and Al-Electrodes,” Separation and Purification Technology, Vol. 71, No. 3, 2010, pp. 308-314. doi:10.1016/j.seppur.2009.12.016
[89] F. Akbal and S. Camc1, “Copper, Chromium and Nickel Removal from Metal Plating Wastewater by Electrocoagulation,” Desalination, Vol. 269, No. 1-3, 2011, pp. 214-222. doi:10.1016/j.desal.2010.11.001
[90] I. Kabdash, T. Arslan, T. Olmez-Hanc1, I. Arslan-Alaton and O. Tünay, “Complexing Agent and Heavy Metal Removals from Metal Plating Effluent by Electrocoagulation with Stainless Steel Electrodes,” Journal of Ha- zardous Materials, Vol. 165, No. 1-3, 2009, pp. 838-845. doi:10.1016/j.jhazmat.2008.10.065
[91] M. Kobya, E. Demirbas, A. Dedeli and M. T. Sensoy, “Treatment of Rinse Water from Zinc Phosphate Coating by Batch and Continuous Electrocoagulation Processes,” Journal of Hazardous Materials, Vol. 173, No. 1-3, 2010, pp. 326-334. doi:10.1016/j.jhazmat.2009.08.092
[92] C. Wang, W. Chou, L. Chen and S. Chang, “Silica Particles Settling Characteristics and Removal Performances of Oxide Chemical Mechanical Polishing Wastewater Treated by Electrocoagulation Technology,” Journal of Hazardous Materials, Vol. 161, No. 1, 2009, pp. 344-350. doi:10.1016/j.jhazmat.2008.03.099
[93] C.-T. Wang and W.-L. Chou, “Performance of COD Removal from Oxide Chemical Mechanical Polishing Wastewater Using Iron Electrocoagulation,” Journal of Environmental Science and Health—Part A Toxic/Hazardous Substances and Environmental Engineering, Vol. 44, No. 12, 2009, pp. 1289-1297. doi:10.1080/10934520903140090
[94] M. Panizza and G. Cerisola, “Applicability of Electrochemical Methods to Carwash Wastewaters for Reuse. Part 2: Electrocoagulation and Anodic Oxidation Integrated Process,” Journal of Electroanalytical Chemistry, Vol. 638, No. 2, 2010, pp. 236-240. doi:10.1016/j.jelechem.2009.11.003
[95] M. Kumar, F. I. A. Ponselvan, J. R. Malviya, V. C. Srivastava and I. D. Mall, “Treatment of Bio-Digester Effluent by Electrocoagulation Using Iron Electrodes,” Journal of Hazardous Materials, Vol. 165, No. 1-3, 2009, pp. 345-352. doi:10.1016/j.jhazmat.2008.10.041
[96] D. Ryan, A. Gadd, J. Kavanagh, M. Zhou and G. Barton, “A Comparison of Coagulant Dosing Options for the Remediation of Molasses Process Water,” Separation and Purification Technology, Vol. 58, No. 3, 2008, pp. 347-352. doi:10.1016/j.seppur.2007.05.010
[97] L. Zhang, G. Xue, N. Zhang, S. Liu, A. Duan and L. Wang, “Decolorization Study of Coking Wastewater by Continuous Electrocoagulation Process,” ICMREE2011—Proedings 2011 International Conference on Materials for Renewable Energy and Environment, Shanghai, May 2011, pp. 860-863.
[98] J. Zhu, F. Wu, X. Pan, J. Guo and D. Wen, “Removal of Antimony from Antimony Mine Flotation Wastewater by Electrocoagulation with Aluminum Electrodes,” Journal of Environmental Sciences, Vol. 23, No. 7, 2011, pp. 1066-1071. doi:10.1016/S1001-0742(10)60550-5
[99] F. Janpoor, A. Torabian and V. Khatibikamal, “Treatment of Laundry Waste-Water by Electrocoagulation,” Journal of Chemical Technology and Biotechnology, Vol. 86, No. 8, 2011, pp. 1113-1120. doi:10.1002/jctb.2625
[100] C. Wang, W. Chou and Y. Kuo, “Removal of COD from Laundry Wastewater by Electrocoagulation/Electroflotation,” Journal of Hazardous Materials, Vol. 164, No. 1, 2009, pp. 81-86. doi:10.1016/j.jhazmat.2008.07.122
[101] A. Akyol, “Treatment of Paint Manufacturing Wastewater by Electrocoagulation,” Desalination, Vol. 285, 2012, pp. 91-99. doi:10.1016/j.desal.2011.09.039
[102] M. Solak, M. Klhc, Y. Hüseyin and A. Sencan, “Removal of Suspended Solids and Turbidity from Marble Processing Wastewaters by Electrocoagulation: Comparison of Electrode Materials and Electrode Connection Systems,” Journal of Hazardous Materials, Vol. 172, No. 1, 2009, pp. 345-352. doi:10.1016/j.jhazmat.2009.07.018
[103] W. Chou, C. Wang and K. Huang, “Investigation of Process Parameters for the Removal of Polyvinyl Alcohol from Aqueous Solution by Iron Electrocoagulation,” Desalination, Vol. 251, No. 1-3, 2010, pp. 12-19. doi:10.1016/j.desal.2009.10.008
[104] W. Chou, C. Wang, K. Huang and T. Liu, “Electrochemical Removal of Salicylic Acid from Aqueous Solutions Using Aluminum Electrodes,” Desalination, Vol. 271, No. 1-3, 2011, pp. 55-61. doi:10.1016/j.desal.2010.12.013
[105] M. Malakootian, H. J. Mansoorian and M. Moosazadeh, “Performance Evaluation of Electrocoagulation Process Using Iron-Rod Electrodes for Removing Hardness from Drinking Water,” Desalination, Vol. 255, No. 1-3, 2010, pp. 67-71. doi:10.1016/j.desal.2010.01.015
[106] A. A. Bukhari, “Investigation of the Electro-Coagulation Treatment Process for the Removal of Total Suspended Solids and Turbidity from Municipal Wastewater,” Bioresource Technology, Vol. 99, No. 5, 2008, pp. 914-921. doi:10.1016/j.biortech.2007.03.015
[107] M. A. Rodrigo, P. Canizares, C. Buitrón and C. Sáez, “Electrochemical Technologies for the Regeneration of Urban Wastewaters,” Electrochimica Acta, Vol. 55, No. 27 2010, pp. 8160-8164. doi:10.1016/j.electacta.2010.01.053
[108] K. Sadeddin, A. Naser and A. Firas, “Removal of Turbidity and Suspended Solids by Electro-Coagulation to Improve Feed Water Quality of Reverse Osmosis Plant,” Desalination, Vol. 268, No. 1-3, 2011, pp. 204-207. doi:10.1016/j.desal.2010.10.027
[109] M. G. Klhc, C. Hosten and S. Demirci, “A Parametric Comparative Study of Electrocoagulation and Coagulation Using Ultrafine Quartz Suspensions,” Journal of Hazardous Materials, Vol. 171, No. 1-3, 2009, pp. 247-252. doi:10.1016/j.jhazmat.2009.05.133
[110] D. Ghernaout, B. Ghernaout and A. Boucherit, “Effect of pH on Electrocoagulation of Bentonite Suspensions in Batch Using Iron Electrodes,” Journal of Dispersion Science and Technology, Vol. 29, No. 9, 2008, pp. 1272- 1275. doi:10.1080/01932690701857483
[111] S. Gao, J. Yang, J. Tian, F. Ma, G. Tu and M. Du, “Electro-Coagulation-Flotation Process for Algae Removal,” Journal of Hazardous Materials, Vol. 177, No. 1-3, 2010, pp. 336-343. doi:10.1016/j.jhazmat.2009.12.037
[112] D. Ghernaout, A. Badis, A. Kellil and B. Ghernaout, “Application of Electrocoagulation in Escherichia coli Culture and Two Surface Waters,” Desalination, Vol. 219, No. 1-3, 2008, pp. 118-125. doi:10.1016/j.desal.2007.05.010
[113] C. Ricordel, A. Darchen and D. Hadjiev, “Electrocoagulation-Electroflotation as a Surface Water Treatment for Industrial Uses,” Separation and Purification Technology, Vol. 74, No. 3, 2010, pp. 342-347. doi:10.1016/j.seppur.2010.06.024
[114] D. Ghernaout, B. Ghernaout, A. Saiba, A. Boucherit and A. Kellil, “Removal of Humic Acids by Continuous Electromagnetic Treatment Followed by Electrocoagulation in Batch Using Aluminium Electrodes,” Desalination, Vol. 239, No. 1-3, 2009, pp. 295-308. doi:10.1016/j.desal.2008.04.001
[115] M. Vepsalainen, M. Ghiasvand, J. Selin, J. Pienimaa, E. Repo, M. Pulliainen and M. Sillanpaa, “Investigations of the Effects of Temperature and Initial Sample pH on Natural Organic Matter (NOM) Removal with Electro- coagulation Using Response Surface Method (RSM),” Separation and Purification Technology, Vol. 69, No. 3, 2009, pp. 255-261. doi:10.1016/j.seppur.2009.08.001
[116] X. Li, Q. Feng, Q. Meng and Y. Ceng, “Electrocoagulation for the Drinking Water Treatment of Polluted Surface Water Supplies,” 2nd International Conference on Bioinformatics and Biomedical Engineering, iCBBE 2008, Shanghai, May 2008, pp. 3091-3094.
[117] N. Uduman, V. Bourniquel and M. K. Danquah and A. F. A. Hoadley, “A Parametric Study of Electrocoagulation as a Recovery Process of Marine Microalgae for Biodiesel Production,” Chemical Engineering Journal, Vol. 174, No. 1, 2011, pp. 249-257. doi:10.1016/j.cej.2011.09.012
[118] D. Vandamme, S. C. V. Pontes, K. Goiris, I. Foubert, L. J. J. Pinoy and K. Muylaert, “Evaluation of Electro-Coagulation-Flocculation for Harvesting Marine and Freshwater Microalgae,” Biotechnology and Bioengineering, Vol. 108, No. 10, 2011, pp. 2320-2329. doi:10.1002/bit.23199
[119] O. Yahiaoui, L. Aizel, H. Lounici, N. Drouiche, M. F. A. Goosen, A. Pauss and N. Mameri, “Evaluating Removal of Metribuzin Pesticide from Contaminated Groundwater Using an Electrochemical Reactor Combined with Ultraviolet Oxidation,” Desalination, Vol. 270, No. 1-3, 2011, pp. 84-89. doi:10.1016/j.desal.2010.11.025
[120] A. E. Yilmaz, R. Boncukcuoglu, M. M. Kocakerim, M. T. Yilmaz and C. Paluluoglu, “Boron Removal from Geothermal Waters by Electrocoagulation,” Journal of Hazardous Materials, Vol. 153, No. 1-2, 2008, pp. 146-151. doi:10.1016/j.jhazmat.2007.08.030
[121] C. P. Nanseu-Njiki, S. R. Tchamango, P. C. Ngom, A. Darchen and E. Ngameni, “Mercury(II) Removal from Water by Electrocoagulation Using Aluminium and Iron Electrodes,” Journal of Hazardous Materials, Vol. 168, No. 2-3, 2009, pp. 1430-1436. doi:10.1016/j.jhazmat.2009.03.042
[122] W. Wan, T. J. Pepping, T. Banerji, S. Chaudhari and D. E. Giammar, “Effects of Water Chemistry on Arsenic Removal from Drinking Water by Electrocoagulation,” Water Research, Vol. 45, No. 1, 2011, pp. 384-392. doi:10.1016/j.watres.2010.08.016
[123] S. Vasudevan, J. Lakshmi and G. Sozhan, “Studies on the Removal of Iron from Drinking Water by Electrocoagulation—A Clean Process,” Clean—Soil, Air, Water, Vol. 37, No. 1, 2009, pp. 45-51. doi:10.1002/clen.200800175
[124] D. Ghosh, C. R. Medhi and M. K. Purkait, “Treatment of Drinking Water Containing Iron Using Electrocoagulation,” International Journal of Environmental Engineering, Vol. 2, No. 1-3, 2010, pp. 212-227.
[125] S. Vasudevan, S. M. Sheela, J. Lakshmi and G. Sozhan, “Optimization of the Process Parameters for the Removal of Boron from Drinking Water by Electrocoagulation—A Clean Technology,” Journal of Chemical Technology and Biotechnology, Vol. 85, No. 7, 2010, pp. 926-933. doi:10.1002/jctb.2382
[126] S. Vasudevan, J. Lakshmi and G. Sozhan, “Effects of Alternating and Direct Current in Electrocoagulation Process on the Removal of Cadmium from Water,” Journal of Hazardous Materials, Vol. 192, No. 1, 2011, pp. 26-34.
[127] E. Keshmirizadeh, S. Yousefi and M. K. Rofouei, “An Investigation on the New Operational Parameter Effective in Cr(VI) Removal Efficiency: A Study on Electrocoagulation by Alternating Pulse Current,” Journal of Hazardous Materials, Vol. 190, No. 1-3, 2011, pp. 119-124. doi:10.1016/j.jhazmat.2011.03.010
[128] M. S. Bhatti, D. Kapoor, R. K. Kalia, A. S. Reddy and A. K. Thukral, “RSM and ANN Modeling for Electrocoa- gulation of Copper from Simulated Wastewater: Multi Objective Optimization Using Genetic Algorithm App- roach,” Desalination, Vol. 274, No. 1-3, 2011, pp. 74-80. doi:10.1016/j.desal.2011.01.083
[129] M. Behbahani, M. R. A. Moghaddam and M. Arami, “Techno-Economical Evaluation of Fluoride Removal by Electrocoagulation Process: Optimization through Response Surface Methodology,” Desalination, Vol. 271, No. 1-3, 2011, pp. 209-218. doi:10.1016/j.desal.2010.12.033
[130] W. Chou and Y. Huang, “Electrochemical Removal of Indium Ions from Aqueous Solution Using Iron Electrodes,” Journal of Hazardous Materials, Vol. 172, No. 1, 2009, pp. 46-53. doi:10.1016/j.jhazmat.2009.06.119
[131] A. Shafaei, M. Rezayee, M. Arami and M. Nikazar, “Removal of Mn2+ Ions from Synthetic Wastewater by Electrocoagulation Process,” Desalination, Vol. 260, No. 1-3, 2010, pp. 23-28. doi:10.1016/j.desal.2010.05.006
[132] E. Lacasa, P. Canizares, C. Sáez, F. J. Fernández and M. A. Rodrigo, “Electrochemical Phosphates Removal Using Iron and Aluminium Electrodes,” Chemical Engineering Journal, Vol. 172, No. 1, 2011, pp. 137-143. doi:10.1016/j.cej.2011.05.080
[133] S. Vasudevan, J. Lakshmi, J. Jayaraj and G. Sozhan, “Remediation of Phosphate-Contaminated Water by Electrocoagulation with Aluminium, Aluminium Alloy and Mild Steel Anodes,” Journal of Hazardous Materials, Vol. 164, No. 2-3, 2009, pp. 1480-1486. doi:10.1016/j.jhazmat.2008.09.076
[134] Z. V. P. Murthy and S. Parmar, “Removal of Strontium by Electrocoagulation Using Stainless Steel and Aluminum Electrodes,” Desalination, Vol. 282, 2011, pp. 63-67. doi:10.1016/j.desal.2011.08.058
[135] G. Moussavi, F. Majidi and M. Farzadkia, “The Influence of Operational Parameters on Elimination of Cyanide from Wastewater Using the Electrocoagulation Process,” Desalination, Vol. 280, No. 1-3, 2011, pp. 127-133. doi:10.1016/j.desal.2011.06.052
[136] M. Pociecha and D. Lestan, “Using Electrocoagulation for Metal and Chelant Separation from Washing Solution after EDTA Leaching of Pb, Zn and Cd Contaminated Soil,” Journal of Hazardous Materials, Vol. 174, No. 1-3, 2010, pp. 670-678. doi:10.1016/j.jhazmat.2009.09.103
[137] K. Mansouri, K. Elsaid, A. Bedoui, N. Bensalah and A. Abdel-Wahab, “Application of Electrochemically Dissolved Iron in the Removal of Tannic Acid from Water,” Chemical Engineering Journal, Vol. 172, No. 2-3, 2011, pp. 970-976. doi:10.1016/j.cej.2011.07.009
[138] N. Mameri, A. R. Yeddou, H. Lounici, D. Belhocine, H. Grib and B. Bariou, “Defluoridation of Septentrional Sahara Water of North Africa by Electrocoagulation Process Using Bipolar Aluminium Electrodes,” Water Research, Vol. 32, No. 5, 1998, pp. 1604-1612. doi:10.1016/S0043-1354(97)00357-6
[139] M. Karhu, V. Kuokkanen, T. Kuokkanen and J. Ramo, “Bench Scale Electrocoagulation Studies of Bio Oil-in-Water and Synthetic Oil-in-Water Emulsions,” Separation and Purification Technology, Vol. 96, 2012, pp. 296-305. doi:10.1016/j.seppur.2012.06.003

Copyright © 2024 by authors and Scientific Research Publishing Inc.

Creative Commons License

This work and the related PDF file are licensed under a Creative Commons Attribution 4.0 International License.