DOI QR코드

DOI QR Code

Laser Based Temperature Measurement of Rotating Disk Using Thermocolor

서모컬러를 이용한 회전 디스크의 레이저 온도 측정

  • Na, Wonhwi (Department of Electrical and Computer Engineering, College of Information and Communication Engineering, Sungkyunkwan Unversity) ;
  • Yoo, JaeChern (Department of Electrical and Computer Engineering, College of Information and Communication Engineering, Sungkyunkwan Unversity)
  • 나원휘 (성균관대학교 정보통신대학 전자전기컴퓨터공학과) ;
  • 유재천 (성균관대학교 정보통신대학 전자전기컴퓨터공학과)
  • Received : 2012.11.19
  • Accepted : 2012.12.10
  • Published : 2013.01.31

Abstract

In this paper, we proposed a laser-based non-contact temperature measuring method for high speed rotating polycarbonate (PC) disk using transparency change of thermocolor. The thermocolor has abilities to change color and transparency due to a change in temperature. The thermocolor is applied on one side of polyvinylidene fluoride (PVDF) membrane. The thermocolor applied membrane is attached to inside of reaction chamber in disk. An optical system consisted of a laser beam radiator and a laser photometer is installed. Laser is irradiated at the bottom side of disk and the transmitted laser beam is detected by the laser photometer at the opposite side of disk. During the disk is rotating, laser is irradiated and detected simultaneously. The laser photometer senses the transmitted laser power and generates voltage as output. The temperature of disk can be detected during the disk is rotating up to 3000 RPM.

Keywords

References

  1. S. Haeberle and R. Zengerle, "Microfluidic platforms for lab-on-a-chip applications", Lab Chip, No. 9, pp. 1037-1110, 2007.
  2. D. C. Leslie, E. Seker, L. A. L. Bazydlo, B. C. Strachan, and J. P. Landers, "Platinum nanoparticlefacilitated reflective surfaces for non-contact temperature control in microfluidic devices for PCR amplification", Lab Chip, Vol. 12, No.1, pp. 127- 132, 2012. https://doi.org/10.1039/c1lc20779b
  3. P. J. Pinter Jr., K. E. Fry, G. Guinn, and J. R. Mauney, "Infrared thermometry: A remote sensing technique for predicting yield in water-stressed cotton", Agricultural Water Management, Vol. 6, No. 4, pp. 385-395, 1983. https://doi.org/10.1016/0378-3774(83)90057-4
  4. H. T. Lam, Y. Kostov, L. Tolosa1, S. Falk, and G. Rao, "A high-resolution non-contact fluorescencebased temperature sensor for neonatal care", Measurement Science and Technology, Vol. 23, No. 23, 2012.
  5. M. Seaver and J. R. Peele, "Noncontact fluorescence thermometry of acoustically levitated waterdrops", Applied Optics, Vol. 29, No. 33, pp. 4956-4961, 1990. https://doi.org/10.1364/AO.29.004956
  6. P. Neuzil, F. Cheng, J. B. W. Soon, L. L. Qian, and J. Reboud, "Non-contact fluorescent bleachingindependent method for temperature measurement in microfluidic systems based on DNA melting curves", Lab Chip, Vol. 10, No. 20, pp. 2818-2821, 2010. https://doi.org/10.1039/c005243d
  7. D. R. Sabatino, T. J. Praisner, and C. R. Smith, "A high-accuracy calibration technique for thermochromic liquid crystal temperature measurements", Experiments in Fluids, Vol. 28, No. 6, pp.479-505, 2000.
  8. T. Hieta, M. Merimaa, M. Vainio, J. Seppä and A. Lassila, "High-precision diode-laser-based temperature measurement for air refractive index compensation", Applied Optics, Vol. 50, No. 31, pp. 5990- 5998, 2011. https://doi.org/10.1364/AO.50.005990
  9. J. P. Longtin and C. H. Fan, "Laser-based temperature measurement at a liquid surface", IHTC, pp. 119-123, Kyongju, Korea, 1998.
  10. I. P. Nagy and J. A. Pojma, "Measurement of temperature profiles of chemical waves by thermocolor imaging", Chemical Physics Letters, Vol. 200, No. 1-2, pp. 147-152, 1992. https://doi.org/10.1016/0009-2614(92)87060-3
  11. K. Tashiro, K. Ono, Y. Minagawa, M. Kobayashi, T. Kawai, and K. Yoshino, "Structure and thermochromic solid-state phase transition of poly (3-alkyl-thiophene)", Journal of Polymer Science Part B: Polymer Physics, Vol. 29, No. 10, pp. 1223- 1233, 1991.
  12. http://www.kustommall.com/front/php/product.php?product_no=262&main_cate_no=105&display _group=1/ (retrieved on Dec. 21, 2012).