Journal of the Architectural Institute of Korea Planning & Design (대한건축학회논문집:계획계)

Architectural Institute of Korea (대한건축학회)
권호 표지
DOI QR코드

DOI QR Code

A Proposal of the Parametric Design Process for the Curved Surface Division of Irregular-Shaped Tall Buildings

비정형 초고층건물의 곡면분할을 위한 파라메트릭 디자인 프로세스 제안

  • Received : 2014.11.05
  • Accepted : 2014.12.18
  • Published : 2015.03.30
⟨ Previous Next ⟩

Abstract

Irregular-shaped tall buildings are being built in many cities globally. These buildings' heights and shapes exhibit the economic competitiveness and symbolism of company, city and nation. These changes in the history of tall buildings began from the technological development, and are still making advancement with technology. The introduction of new digital tools enables to easily design various irregular-shaped buildings. However, emphasis on distinctive shapes, ignoring the complicated correlation between design and construction, only yielded plans that cannot be translated into reality. The future progress path is expected to be competitive in irregular and eco-friendly fields, not in height. Therefore, it is necessary to accompany rational and methodical approaches toward irregular-shaped tall buildings, along with ingenious solutions to design and construction. When the designs which neglected construction and economics are implemented, it is inevitable to confront difficulties and will result in failure. On this light, this research will precisely comprehend the geometric features of the early design models and establish curved surface division in order to propose a design process that can effectively deal with the problems that might arise between the design and construction companies from the early stages.

Keywords

Acknowledgement

Supported by : 한국연구재단

References

  1. 김언용 외 1인, 생성디자인 시스템 기반 설계프로세스, 대한건축학회 학술 발표대회 논문집 계획계. 제 29권 제 1호 (통권 제 53집), 2009
  2. 나원경, 비정형 초고층건물의 형태적 특성 분석에 관한 연구, 영남대학교 석사학위논문, 2011
  3. 문성우, 패러메트릭 기술을 이용한 건축 디자인 체계화에 관한 연구, 아주대학교 석사학위논문, 2011
  4. 박사욱, 정보화 시대의 건축과 가상건축의 가상성에 관한 연구, 수원대 대한건축학회 논문집, 1997
  5. 박상민, 복합용도 초고층건물의 기능별 면적비율에 따른 건물 체적과 계획요소의 분포 및 분석에 관한 연구, 대한건축학회논문집, 2007
  6. 박상민, 뒤틀림(Twist)형태의 초고층건물 기하학적 특성에 관한 연구, 대한건축학회지, 11권, 2호, 2009
  7. 박정대, 곡면형상의 구축을 위한 디지털 기술과 건축 디자인 프로세스, 서울대학교 박사학위논문, 2005
  8. 박흥식, 파라메트릭기반 비정형 형태 생성방법에 관한 기초연구, 대한건축학회 학술발표대회 논문집, 2008
  9. 박흥식, 평면사변형 메쉬기법을 활용한 비정형 건축의 외피 생성 방법에 관한 연구, 한양대학교 석사학위논문, 2009
  10. 한지연, FREE-FORM 건축의 곡면형상 구축의 유형분류 및 구축특성에 관현 연구, 세종대학교 석사학위논문, 2011
  11. Branko Kolarevic, Designing and Manufacturing Architecture in the Digital Age, University of Pennsylvania, USA, 2003
  12. Gabriela, Maria and Celani, Caffarena, Beyond Aalysis and Representation in CAD-a New Computational Approach to Design Education, MIT, 2002
  13. In Y. Kalay, Fundamental problems in the development of computer-based architectural design models. Computability of design, 1987
  14. Javier Monedero, "Parametric design: A review and some experiences", 15th CAADe-Conference Proceedings, Vienna University of Technology, 2006
  15. Karel Voller, Morphological Scheme of Second-Generation Non-Orthogonal High-Rises, CTBUH 8th World Congress, Dubai, 2008
  16. Kolatan, Ferda, Responsive Architecture through Parametric Design. New Kind of Science, University of Pennsylvania, 2006
  17. Kreysig, E. Differential Geometry, Dover Publications: New York, Sheldon, 2002
  18. Lynn, Greg, Animate Form, Princeton Architectural Press, New York, 1998
  19. Mark Burry, Paramorph. in Stephen Perrella (ed.), AD Profile 141: Hypersurface Architecture II. London: Academy Editions, 1999
  20. Mitchell, W. J. Computer-aided architectural design. New York: Petrocelli/Charter. 1977
  21. Sang Min Park, Tall Building Form Generation by Parametric Design Process, Chicago, Illinois, 2005